cnc fiber laser cutting machine 500w 700w 1000w 2000w 3000w mild / stainless / carbon steel

CNC ласерско сечење машина машина 500w 700w 1000w 2000w 3000w 3000w благ / не'рѓосувачки / јаглероден челик

accurl high photo-electric conversion efficiency can be up to about 30%. So the machine runs with very low power consumption.
Assisted with laser beams of good quality, the focus spot is small, and the cutting seam is very fine.
The working efficiency is high, and the quality is good by using double-clad fiber (DCF).
The light spot enjoys good quality. And the machine distorts just slightly. Besides, work pieces have even cutting seams.
The completely enclosed light path is totally composed of fiber laser and fiber laser units.
Fiber laser and fiber laser units are combined together based on cable splicing technology. And the whole light path is enclosed in fiber laser waveguide.
No need of mirrors in laser generator. No working gas in laser generator. And no need to maintain laser generator when the machine runs.
Fiber optic transmission requires no need of reflector mirrors. The machine saves maintenance costs greatly.
The efficiency is very stable and reliable by adopting the diode pump laser module.
It’s quite convenient to operate and maintain the machine. No need to adjust the light path with fiber-optic transmission system.
With the very long working life, key units can work one hundred thousand hours without maintenance.

Технички параметри

Equipment name	Машина за сечење на влакна со влакна
Модел	JBT-500W	JBT-800W	JBT-1000W	JBT-2000W	JBT-3000W	JBT-6000W
Ласерска моќност	500W	800W	1000W	2000W	3000W	6000W
Max. cutting thickness	SS ≤3mm	SS ≤3.5mm	SS ≤5mm	SS ≤8mm	SS ≤10mm	SS ≤16mm
Max. cutting thickness	CS ≤6mm	CS ≤8mm	CS ≤10mm	CS ≤16mm	CS ≤20mm	CS ≤25mm
Макс. брзина на движење	80м / мин				120м / мин	120м / мин
Точност за позиционирање	0,03мм / м
Repeat Positioning	0,02мм / м
Работна маса	3000x1500mm, 4000x1500mm, 4000x2000mm, 6000x1500mm, 6000x2000mm, 8000x2000mm, 10000x2000mm, etc
Контролен систем	CNC - International professional metal laser cutting machine dedicated software
Ласерска глава за сечење	Original imported from Sweden
Supported format	PLT, DXF, BMP, AI, DST, DWG, итн.
Cooling Type	Ладење на вода

Machine Debugging

1. Adopts moving gantry structure, imported high-precision linear guide, smooth transmission, high-precision.

2. With the moving beam as a whole welded structure, machine bed is tough after annealing, and then the vibration aging treatment, can completely eliminate the stress of welding and machining, good rigidity, high accuracy can be maintained for a long time does not deform.

3. X, Y, Z axes are imported from Japan servo motor, high-precision, high- speed, high-torque, high inertia, stable performance and durable. Ensure the machine's high speed and acceleration.

4. Using many laser cutting control special function modules, powerful, human machine interface, easy to operate based on the Windows operating system, fiber laser cutting machine CNC system integrated.

5. Independent research and development of personalized nesting software, CNC cutting machine to achieve " full-time cutting, efficient cutting and high nesting rate cut " core technology is the fundamental guarantee of effective material savings, improve cutting efficiency.

6. Cutting fiber laser head selection Switzerland Raytools produced special cutting head, and capacitive sensing, induction of high precision and responsive, the most stable and reliable performance.

7. Imported high precision electronic control proportional valve, precise control of the cutting auxiliary gas pressure, in order to achieve the best cutting results.

Машинска апликација

CNC Fiber Laser Cutting Machine 500w 700w 1000w 2000w 3000w Mild / Stainless / Carbon Steel - Extensive Use:

Kitchen appliance, Mechanical equipment, Electrical equipment, Lighting hardware, Advertising signs, Auto parts, Display equipment, All kinds of metal products, Sheet metal processing etc industry.

Брзи детали

Апликација: Ласерско сечење
Состојба: Ново
Тип на ласер: Ласерски влакна
Applicable Material: Acrylic, Crytal, MDF, Metal
Дебелина на сечење: 0-30мм
Cutting Area: 10000x2000mm
Cutting Speed: 80-120m/min
ЦПУ или не: Да
Начин на ладење: Ладење на вода
Контролен софтвер: Cypcut
Поддржано за графички формат: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT
Сертификација: CE, ISO, SGS
Обезбедена услуга по продажбата: Инженери достапни за сервисирање машини во странство
Product name: CNC Fiber Laser Cutting Machine Mild / Stainless / Carbon Steel
Keyword: Fiber laser cutting machine
Electrical System: ABB (SWEDEN)
Gas proportional valve: SMC(Japan)
Laser Source: IPG
Function: Metal Cutting Machiens
Type: Fiber Laser Cutting
Repostion Accuracy: 0.02mm
Position Accuracy: 0.03mm
Max.Moving Speed: 120m/min

Поврзани производи

Тагови: акрилна ласерска машина за сечење, производи за машини за ласер, мала акрилна ласерска машина за сечење