500W машина за сечење ласерско влакно со метални цевки

Апликација за производи

Точно машина за сечење со влакна со влакна is equipped with fiber laser which is energy-efficient, environment-friendly as well as highly efficient.
Recently, fiber laser medium is the most popular and stable laser source internationally. The laser beam of high energy density is focused on the surface of the material. Then the area melts, burns, vaporizes away, and the slag is blown away by a jet of gas, leaving a smooth seam with a high-quality surface finish made by a relative motion between laser light beam and preset routine for the material. That is to say, the automatic laser cutting can be realized when moving the light spot position by the mechanical systems controlled by CNC. KJG fiber laser cutting machine is high-tech equipment integrated with laser technology, CNC technology and mechanical technology.

Главни карактеристики

1) The Accurl машина за ласерско сечење with the highest precision in China, it can cut small metal bike design with size of half a coin and perfectly cut 6mm mild steel,120 holes can be cut within one minute.

2) 600℃ heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, accurate CO2 protection welding, to make sure 20 years usage without deformation.

3) Using laser electrical cabinet integration design, cover small area , save space, minimalist design.

4) Scrap car symmetrical design, both sides can clean up the waste; Put machine to the romm has no left and right requirements; Pneumatic lifter device to prevent the material from scratching.

5) Specially used for cutting 0.5-6mm carbon steel, 0.5-5mm stainless steel, galvanized steel, electrolytic zinc-coated steel sheet, silicon steel and other kinds of thin metal sheets.1000W can cut 3mm aluminum and 2mm copper.

Нашата услуга

Услуга пред продажба

* Technical solution.

* Online video authentication machine work.

* Cutting samples provided by DHL.

Услуга по продажбата

* Supplier will provide detail manual for software, hardware and trouble shooting, also supplier should give necessary guidance online if Buyer need. If it’s necessary, Buyer should send regular his technical staff to Supplier for technical training.

Брзи детали

Апликација: Ласерско сечење
Состојба: Ново
Тип на ласер: Ласерски влакна
Применлив материјал: акрилик, критал, стакло, кожа, медијапан, метал, хартија, пластика, плексиглакс, иверица, гума, камен, дрво
Cutting Thickness:6mm
Површина за сечење: 1500 * 3000мм
Cutting Speed:72m/min
ЦПУ или не: Да
Начин на ладење: Ладење на вода
Control Software: cypcut controller
Graphic Format Supported: AI, DST, DWG, DXF, DXP, LAS
Место на потекло: Анхуи, Кина (копното)
Име на марка: ACCURL
Model Number: KJG-150300DT with 800W
Сертификација: CE, ISO, SGS, UL
Обезбедена услуга по продажбата: Инженери достапни за сервисирање машини во странство
Laser type: IPG fiber laser generator from USA
Laser wavelength: 1070nm
Laser power output rating: 800W
X-axis travel: 1500mm
Y-axis travel: 3000mm
Working table:Open design, fixed table
Режим на возење: Двоен багажник и систем за возење на пиони
Format supported:PLT, DXF, AI etc
Position accuracy: 0.05mm
Total Power consumption: 10KW